当前位置:网站首页产品展示 > > 信号发生器 > MG362x1ARF/Microwave Signal Generator

相关文章 / article

RF/Microwave Signal Generator

RF/Microwave Signal Generator

简要描述:Rubidium delivers unmatched signal purity, output power, frequency stability and exceptional utility for a broad range of measurement applications across 9 kHz to 70 GHz frequency range.

更新时间:2023-12-27

产品型号: MG362x1A

所属分类:信号发生器

访问量:229

详细说明:

Overview

Signal purity determines quality of measurements in several applications such as radar, transceiver, ADC/DAC and components testing. Rubidium™ pushes the envelope in phase noise performance with its low and ultra low phase noise options. Coupled with best-in-class harmonic and spurious performance, Rubidium signal generator offers industry leading overall signal purity performance that enables customers to make more accurate measurements.

Rubidium MG362x1A offers atomic clock frequency stability with an internal rubidium frequency reference option. Alternatively, customers can also get exceptional frequency stability by locking an internal oven controlled crystal oscillator (OCXO) reference to an external GNSS/GPS signal. The exceptional frequency stability makes Rubidium an ideal signal generator for Metrology and high speed clock applications.

Rubidium’s AM, FM/PM and Pulse modulation capabilities enable generation of wide range of complex analog modulated signals. Simultaneous modulation of AM/FM, AM/PM, or FM/Pulse is possible to generate complex modulation waveforms such as chirps. Wide range of signal simulation capabilities are built into the signal generators for pulsed radar testing, as well.

Rubidium features a 7 inch touch screen along with keypad and dial on the front panel. Four USB 3.0 ports on the front panel enable connecting to a variety of devices such as memory devices and Anritsu's USB power sensors. Standard drivers such as IVI.NET and IVI-C along with support of SCPI commands make remote programming of Rubidium quick and efficient.


Features Benefit
Very low phase noise, close in and far out
Atomic clock frequency stability and accuracy
Onsite level and frequency calibration
Very low harmonic and spurious
Quad pulse signal generation and pulse sweep

Adapters

Model Number Description
1091-26-R SMA(m) to N(m), DC to 18 GHz, 50 Ω
1091-27-R SMA(f) to N(m), DC to 18 GHz, 50 Ω
1091-80-R SMA(m) to N(f), DC to 18 GHz, 50 Ω
1091-81-R SMA(f) to N(f), DC to 18 GHz, 50 Ω
34NK50 Precision Adapter, N(m) to K(m), DC to 18 GHz, 50 Ω
34NKF50 Precision Adapter, N(m) to K(m), DC to 18 GHz, 50 Ω
34NKF50 Precision Adapter, N(m) to K(f), DC to 18 GHz, 50 Ω
34NFK50 Precision Adapter, N(f) to K(m), DC to 18 GHz, 50 Ω
34NFKF50 Precision Adapter, N(f) to K(f), DC to 18 GHz, 50 Ω
K220B Precision Adapter, K(m) to K(m), DC to 40 GHz, 50 Ω
K222B Precision Adapter, K(f) to K(f), DC to 40 GHz, 50 Ω
K224B Precision Adapter, K(m) to K(f), DC to 40 GHz, 50 Ω
33KK50C Calibration Grade Adapter, K(m) to K(m), DC to 43.5 GHz, 50 Ω
33KKF50C Calibration Grade Adapter, K(m) to K(f), DC to 43.5 GHz, 50 Ω
33KFKF50C Calibration Grade Adapter, K(f) to K(f), DC to 43.5 GHz, 50 Ω
34VFK50A Precision Adapter, V(f) to K(m), DC to 43.5 GHz, 50 Ω
34VFKF50A Precision Adapter, V(f) to K(f), DC to 43.5 GHz, 50 Ω
34VK50A Precision Adapter, V(m) to K(m), DC to 43.5 GHz, 50 Ω
34VKF50A Precision Adapter, V(m) to K(f), DC to 43.5 GHz, 50 Ω

Test Port Cables, Flexible, Ruggedized, Phase Stable

N120-6 RF Cables, Semi-Rigid, N(m) to N(m), 1 each, 0.01 to 18 GHz, 50 Ω, 15 cm (5.9 in)
NS120MF-6 RF Cables, Semi-Rigid, N(f) to N(f), 1 each, 0.01 to 18 GHz, 50 Ω, 15 cm (5.9 in)
15NNF50-1.0B Test Port Cable, Flexible, Phase Stable, 1.0 m (39”), DC to 18 GHz, N(f) to N(m), 50 Ω
15NNF50-1.5B Test Port Cable, Flexible, Phase Stable, 1.5 m (59”), DC to 18 GHz, N(f) to N(m), 50 Ω
15NN50-1.0B Test Port Cable, Flexible, Phase Stable, 1.0 m (39”), DC to 18 GHz, N(m) to N(m), 50 Ω
15LLF50-1.0A Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, 3.5 mm(m) to 3.5 mm(f), 50 Ω
15KKF50-1.0A Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, K(m) to K(f), 50 Ω
3671KFS50-60 Test Port Cable, Flexible, Phase Stable, DC to 26.5 GHz, K(f) to 3.5 mm(m), 63.5 cm, 50 Ω
3671KFK50-60 Test Port Cable, Flexible, Phase Stable, DC to 40 GHz, K(f) to K(m), 63.5 cm (25 in), 50 Ω
3671KFKF50-60 Test Port Cable, Flexible, Phase Stable, DC to 40 GHz, K(f) to K(f), 63.5 cm (25 in), 50 Ω
3671KFK50-100 Test Port Cable, Flexible, Phase Stable, DC to 40 GHz, K(f) to K(m), 1 m (38 in), 50 Ω
806-206-R Flexible Phase Stable Cable, DC to 70 GHz, 24 in (61 cm), V(m) – V(f), 50Ω
806-209-R Flexible Phase Stable Cable, DC to 70 GHz, 36 in (91.5 cm), V(m) – V(f), 50Ω
806-304-R Flexible Phase Stable Cable, DC to 40 GHz, 36 in (91.5 cm), K(m) – K(f), 50Ω
806-396-R Flexible Low Loss Phase Stable Cable, DC to 70 GHz, 36 in (91.5 cm), V(m)-V(f), 50Ω

Phase-Stable 18 GHz, 40 GHz and 43.5 GHz Semi-Rigid Cables (Armored)

3670N50-1 Test Port Cable, Armored, Semi-rigid, 30.48 cm (1 ft), DC to 18 GHz, N(m) to N(f), 50 Ω
3670N50-2 Test Port Cable, Armored, Semi-rigid, 60.96 cm (2 ft), DC to 18 GHz, N(m) to N(f), 50 Ω
3670NN50-1 Test Port Cable, Armored, Semi-rigid, 30.48 cm (1 ft), DC to 18 GHz, N(m) to N(m), 50 Ω
3670NN50-2 Test Port Cable, Armored, Semi-rigid, 60.96 cm (2 ft), DC to 18 GHz, N(m) to N(m), 50 Ω
3670K50A-1 Test Port Cable, Armored, Semi-rigid, 30.48 cm (1 ft), DC to 43.5 GHz, K(m) to K(f), 50 Ω
3670K50A-2 Test Port Cable, Armored, Semi-rigid, 60.96 cm (2 ft), DC to 43.5 GHz, K(m) to K(f), 50 Ω
Model Number Description
01-200 Calibrated Torque End Wrench, GPC-7 and Type N
01-201 Torque End Wrench, 5/16 in, 0.9 N.m (8 lbf·in) (for tightening male devices, for SMA, 3.5 mm, 2.4 mm, K, and V connectors)
01-203 Torque End Wrench, 13/16 in, 0.9 N.m (8 lbf·in) (for tightening ruggedized SMA, 2.4 mm, K and V test port connectors)
01-204 End Wrench, 5/16 in, Universal, Circular, Open-ended (for SMA, 3.5 mm, 2.4 mm, K, and V connectors)
Applications

Delivering the highest purity and frequency stability levels of performance available in a RF/Microwave Signal Generator.

Specifications
Parameter Specification
Frequency Range 9 kHz to 20/43.5 GHz/70 GHz Operable up to 72 Ghz
Frequency Resolution 0.001 Hz
Phase Offset
Adjustable in 0.1 degree steps
SSB phase noise -136 dBc/Hz (typ) and -140 dBc/Hz (measured) @ 10 GHz output, 10 kHz offset
Internal time base stability - Aging < ±2 x 10E-8 per year with option 0003
< ±1 x 10E-9 per year with option 0056
Reference frequency input/output 10 MHz, 100 MHz and 1.6 GHz
Output power -130 dBm to +20 dBm (MG36221A standard output)
-130 dBm to +16 dBm (MG36241A, standard output)
-90 dBm to +6 dBm (MG36271A, standard output)
Level accuracy and flatness +/- 1.4 dB (MG36221A/MG36241A)
+/- 2.5 dB (MG36271A)
Harmonics (20/43.5/70 GHz) -58 dBc (MG36221A)
-55 dBc (MG36241A and MG36271A)
Sub Harmonics
-83 dBc (MG36221A and MG36241A)
-63 dBc (MG36271A)
Non harmonics (20/43.5/70 GHz) -63 dBc
Modulation AM, FM, PM and Pulse
Pulse modulation: min pulse width <50 ns (Unleveled)
Pulse modulation: Rise/Fall times 5 ns (typical)
LF signal Generator waveforms Sine, square, pulse, triangle, ramp, GN/UN noise
Frequency sweep modes Step, List, Analog
Frequency sweep width 9 kHz to full frequency range (step, list)

100 MHz to full frequency range (Analog)
Power sweep Step and List
Power sweep resolution 0.01 dB/step
Options
Option Description
MG362x1A-0001 Rack Mount with Slides (Cannot be ordered with Option 11)
MG362x1A-0002 Mechanical Step Attenuator, 110 dB (MG36221A/MG36241A)
Mechanical Step Attenuator, 90 dB (MG36271A)
MG362x1A-0003 Low Phase Noise and High Stability (Required for Option 13)
MG36221A-0006
Analog Sweep, Frequency
MG362x1A-0009 Rear Panel K Connector RF Output (for MG36221A and MG36241A)
MG362x1A-0011 Rack Mount without Slides (Shelf Mount)
MG362x1A-0012 Amplitude, Frequency and Phase Modulation, Internal/External (Requires Option 27 )
MG362x1A-0013 Ultra Low Phase Noise (Requires Option 3)
MG362x1A-0015 High Power Output
MG362x1A-0023 Option 23, Premium Phase Noise, CW (Requires Options 3 and 13) (Available on model MG36221A only)
MG362x1A-0026 Pulse Modulation, Internal/External (Requires Option 27)
MG362x1A-0027 Modulation Hardware (Requires Option 12, 26, or both for functionality)
MG362x1A-0029 Front Panel Modulation Input/Output Access (Requires Option 27)
MG362x1A-0030
600 ohms External AM/FM Input Impedance (Requires Option 12 and 27)
MG362x1A-0033
Phase Noise, Export Option (Cannot be ordered with Options 3, 13, 23 or 56 for MG36221A. Cannot be ordered with Options 3, 13, or 56 for MG36241A or MG36271A. )
MG362x1A-0056 Ultra Stability Time Base (Requires Option 3 or 13)
MG362x1A-0066 GNSS Atomic Clock Receiver (Requires option 3 or 13)
MG362x1A-0097 Accredited Calibration
MG362x1A-0098 Standard Calibration
MG362x1A-0099 Premium Calibration

x- Designation varies with model number



留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7