MS46322B 是经济型 ShockLine™ 矢量网络测试仪系列,频率范围为 1 MHz - 8/20/43.5 GHz。其基于 shockline VNA 芯片级技术,简化了内部 VNA 架构,提高了频率,降低了设备成本,加强了准确度和测量可重复性。
MS46322B 均为 2 端口 VNA,采用紧凑耐用的 2U 机箱封装。全系列的扫描速度为每点 130 微秒,高于 100 dB 动态范围,频率范围可达 43.5 GHz,适合测试诸如工程、制造和成本敏感型的教育应用中的无源设备。
ShockLine™ VNA 外形小,可以远程编程,易于集成到机架式测试系统中。其支持 SCPI 命令编程和软件驱动程序,可用于见的编程环境中。全系列的远程控制使用业界标准 LAN 通信。ShockLine™ VNA 为手动测试设备提供出色的图形用户界面。可连接触摸屏监视器、键盘和鼠标(用户提供),启用全功能用户界面。
Precision Automatic Calibrator Modules
Model Number | Description |
MN25208A | 2-port USB SmartCal Module, 300 kHz to 8.5 GHz (available with connector options: -001 N(f), -002 K(f), -003 3.5 mm(f) |
MN25408A | 4-port USB SmartCal Module, 300 kHz to 8.5 GHz (available with N(f) connectors) |
MN25218A | 2-port USB SmartCal Module, 1 MHz to 20 GHz (available with K(f) connectors) |
MN25418A | 4-port USB SmartCal Module, 300 kHz to 20 GHz (available with K(f) connectors) |
36585K-2M | K Precision AutoCal Module, 70 kHz to 40 GHz, K(m) to K(m) |
36585K-2F | K Precision AutoCal Module, 70 kHz to 40 GHz, K(f) to K(f) |
36585K-2MF | K Precision AutoCal Module, 70 kHz to 40 GHz, K(m) to K(f) |
2000-1809-R | Serial to USB Adapter (required for use with 36585 AutoCal module |
Mechanical Calibration Kits
Model Number | Description |
3650A | SMA/3.5 mm Calibration Kit, Without Sliding Loads, DC to 26.5 GHz, 50 Ω |
3650A-1 | SMA/3.5 mm Calibration Kit, With Sliding Loads, DC to 26.5 GHz, 50 Ω |
3652A | K Connector Calibration Kit, Without Sliding Loads, DC to 40 GHz, 50 Ω |
3653A | N Connector Calibration Kit, Without Sliding Loads, DC to 18 GHz, 50 Ω |
OSLN50A-8 | Precision N Male Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω |
OSLNF50A-8 | Precision N Female Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω |
TOSLN50A-8 | Precision N Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω |
TOSLNF50A-8 | Precision N Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω |
OSLN50A-18 | Precision N Male Open/Short/Load Mechanical Calibration Tee, DC to 18 GHz, 50 Ω |
OSLNF50A-18 | Precision N Female Open/Short/Load Mechanical Calibration Tee, DC to 18 GHz, 50 Ω |
TOSLN50A-18 | Precision N Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 18 GHz, 50 Ω |
TOSLNF50A-18 | Precision N Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 18 GHz, 50 Ω |
TOSLK50A-20 | Precision K Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 20 GHz, 50 Ω |
TOSLKF50A-20 | Precision K Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 20 GHz, 50 Ω |
TOSLK50A-40 | Precision K Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 40 GHz, 50 Ω |
TOSLKF50A-40 | Precision K Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 40 GHz, 50 Ω |
TOSLK50A-43.5 | Precision K Male Through/Open/Short/Load Mechanical Calibration Tee with S1P data, DC to 43.5 GHz, 50 Ω |
TOSLKF50A-43.5 | Precision K Female Through/Open/Short/Load Mechanical Calibration Tee with S1P data, DC to 43.5 GHz, 50 Ω |
Verification Kits
Model Number | Description |
3663-3 | N Connector Verification Kit |
3668-4 | 43.5 GHz K Connector Verification Kit |
Cables and Adapters
Model Number | Description |
N120-6 | RF Cables, Semi-Rigid, N(m) to N(m), 1 each, 0.01 to 18 GHz, 50 Ω, 15 cm (5.9 in) |
NS120MF-6 | RF Cables, Semi-Rigid, N(f) to N(f), 1 each, 0.01 to 18 GHz, 50 Ω, 15 cm (5.9 in) |
1091-26-R | SMA(m) to N(m), DC to 18 GHz, 50 Ω |
1091-27-R | SMA(f) to N(m), DC to 18 GHz, 50 Ω |
1091-80-R | SMA(m) to N(f), DC to 18 GHz, 50 Ω |
1091-81-R | SMA(f) to N(f), DC to 18 GHz, 50 Ω |
71693-R | Ruggedized adapter, K(f) to N(f), DC to 18 GHz, 50 Ω |
34NN50A | Precision Adapter, N(m) to N(m), DC to 18 GHz, 50 Ω |
34NFNF50 | Precision Adapter, N(f) to N(f), DC to 18 GHz, 50 Ω |
34NK50 | Precision Adapter, N(m) to K(m), DC to 18 GHz, 50 Ω |
34NKF50 | Precision Adapter, N(m) to K(f), DC to 18 GHz, 50 Ω |
34NFK50 | Precision Adapter, N(f) to K(m), DC to 18 GHz, 50 Ω |
34NFKF50 | Precision Adapter, N(f) to K(f), DC to 18 GHz, 50 Ω |
K220B | Precision Adapter, K(m) to K(m), DC to 40 GHz, 50 Ω |
K222B | Precision Adapter, K(f) to K(f), DC to 40 GHz, 50 Ω |
K224B | Precision Adapter, K(m) to K(f), DC to 40 GHz, 50 Ω |
33KK50C | Calibration Grade Adapter, K(m) to K(m), DC to 43.5 GHz, 50 Ω |
33KKF50C | Calibration Grade Adapter, K(m) to K(f), DC to 43.5 GHz, 50 Ω |
33KFKF50C | Calibration Grade Adapter, K(f) to K(f), DC to 43.5 GHz, 50 Ω |
34VFK50A | Precision Adapter, V(f) to K(m), DC to 43.5 GHz, 50 Ω |
34VFKF50A | Precision Adapter, V(f) to K(f), DC to 43.5 GHz, 50 Ω |
34VK50A | Precision Adapter, V(m) to K(m), DC to 43.5 GHz, 50 Ω |
34VKF50A | Precision Adapter, V(m) to K(f), DC to 43.5 GHz, 50 Ω |
Test Port Cables, Flexible, Ruggedized, Phase Stable
Model Number | Description |
15NNF50-1.0B | Test Port Cable, Flexible, Phase Stable, 1.0 m (39”), DC to 18 GHz, N(f) to N(m), 50 Ω |
15NNF50-1.5B | Test Port Cable, Flexible, Phase Stable, 1.5 m (59”), DC to 18 GHz, N(f) to N(m), 50 Ω |
15NN50-1.0B | Test Port Cable, Flexible, Phase Stable, 1.0 m (39”), DC to 18 GHz, N(m) to N(m), 50 Ω |
15LL50-1.0A | Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, 3.5 mm(m) to 3.5 mm(m), 50 Ω |
15LLF50-1.0A | Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, 3.5 mm(m) to 3.5 mm(f), 50 Ω |
15KK50-1.0A | Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, K(m) to K(m), 50 Ω |
15KKF50-1.0A | Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, K(m) to K(f), 50 Ω |
3671KFS50-60 | Test Port Cable, Flexible, Phase Stable, DC to 26.5 GHz, K(f) to 3.5 mm(m), 63.5 cm, 50 Ω |
3671KFK50-60 | Test Port Cable, Flexible, Phase Stable, DC to 40 GHz, K(f) to K(m), 63.5 cm (25 in), 50 Ω |
3671KFKF50-60 | Test Port Cable, Flexible, Phase Stable, DC to 40 GHz, K(f) to K(f), 63.5 cm (25 in), 50 Ω |
3671KFK50-100 | Test Port Cable, Flexible, Phase Stable, DC to 40 GHz, K(f) to K(m), 1 m (38 in), 50 Ω |
806-304-R | Flexible Phase Stable Cable, DC to 40 GHz, 36 in (91.5 cm), K(m) – K(f), 50Ω |
806-423-R | Flexible Phase Stable Cable, DC to 43.5 GHz, 24 in (61 cm), K(f) – K(f), 50 Ω |
806-424-R | Flexible Phase Stable Cable, DC to 43.5 GHz, 24 in (61 cm), K(m) – K(f), 50 Ω |
806-425-R | Flexible Phase Stable Cable, DC to 43.5 GHz, 1 m (39.4 in), K(f) – K(f), 50 Ω |
806-426-R | Flexible Phase Stable Cable, DC to 43.5 GHz, 1 m (39.4 in), K(m) – K(f), 50 Ω |
Phase-Stable 18 GHz, 40 GHz, and 43.5 GHz Semi-Rigid Cables (Armored)
Model Number | Description |
3670N50-1 | Test Port Cable, Armored, Semi-rigid, 30.48 cm (1 ft), DC to 18 GHz, N(m) to N(f), 50 Ω |
3670N50-2 | Test Port Cable, Armored, Semi-rigid, 60.96 cm (2 ft), DC to 18 GHz, N(m) to N(f), 50 Ω |
3670NN50-1 | Test Port Cable, Armored, Semi-rigid, 30.48 cm (1 ft), DC to 18 GHz, N(m) to N(m), 50 Ω |
3670NN50-2 | Test Port Cable, Armored, Semi-rigid, 60.96 cm (2 ft), DC to 18 GHz, N(m) to N(m), 50 Ω |
3670K50A-1 | Test Port Cable, Armored, Semi-rigid, 30.48 cm (1 ft), DC to 43.5 GHz, K(m) to K(f), 50 Ω |
3670K50A-2 | Test Port Cable, Armored, Semi-rigid, 60.96 cm (2 ft), DC to 43.5 GHz, K(m) to K(f), 50 Ω |
External Hard Drives
Model Number | Description |
2000-1858-R | Extra external hard drive with preloaded software (For MS46322B only) |
Transit Case
Model Number | Description |
760-269 | ShockLine VNA Transit Case, Hard plastic with wheels |
Tools
Model Number | Description |
01-200 | Calibrated Torque End Wrench, GPC-7 and Type N |
01-201 | Torque End Wrench, 5/16 in, 0.9 N.m (8 lbf·in) (for tightening male devices, for SMA, 3.5 mm, 2.4 mm, K, and V connectors) |
01-203 | Torque End Wrench, 13/16 in, 0.9 N.m (8 lbf·in) (for tightening ruggedized SMA, 2.4 mm, K and V test port connectors) |
01-204 | End Wrench, 5/16 in, Universal, Circular, Open-ended (for SMA, 3.5 mm, 2.4 mm, K, and V connectors) |
Anritsu has partnered with the following industry-leading companies to provide a variety of proven material measurement capabilities that are compatible with the VectorStar and ShockLine vector network analyzer families.
Material Measurements
Compass Technology Choose from off-the-shelf or custom-designed RF material measurement systems able to measure material properties from 100 MHz to 90 GHz. These solutions include: focused beam, resonant cavity, waveguides, spot probes, free space measurement systems, and more. Anritsu and Compass Technology Group Material Measurements Solutions Compass Technology Group VectorStar Integration [video] | |
Keycom Technologies Select from a variety of material measurement solutions that leverage various methods including: resonator, frequency change, probe type, co-axial tube and waveguide type S-parameter, free space, capacitance, epsilometery, and more. Anritsu and Keycom Material Measurement Solution | |
SWISSto12 Providing hardware and software technology capable of measuring: solid samples; soft sample and foam; liquid samples and powder; thin films; dielectric coatings and multilayer materials; alumina plate; and more. Anritsu and SWISSto12 Material Measurement Solution |