The ShockLineTM MS46131A series consists of three modular, PC-controlled 1-port vector network analyzers (VNAs) with frequency ranges from 1 MHz to 8/20/43.5 GHz. Anritsu’s patented nonlinear transmission line (NLTL) technology VNA-on-chip technology simplifies the internal VNA architecture, reducing the size and cost of the instrument while enhancing accuracy and measurement repeatability. The ShockLine MS46131A series is small and portable enough to bring the VNA port to the device under test (DUT), improving measurement stability and simplifying test configuration by eliminating test port cables.
The ShockLine MS46131A series is ideally suited for 1-port RF and microwave applications in engineering, manufacturing, and education. All three VNA models have fast sweep speed and excellent corrected directivity making them suitable for a variety of 1-port device test applications including measuring passive 5G mmWave components.
Two independent ShockLine MS46131A VNAs can be controlled from an external user-supplied PC via USB. The series does not have any on-board memory, which simplifies their use in secure applications.
The combination of portability, performance make the ShockLine MS46131A VNA series ideal for modular passive device test applications.
Precision Automatic Calibrator Modules
| Model Number | Description |
| MN25208A | 2-port USB SmartCal Module, 300 kHz to 8.5 GHz (available with connector options: -001 N(f), -002 K(f), -003 3.5 mm(f), -004 SMA(f)) |
| MN25408A | 4-port USB SmartCal Module, 300 kHz to 8.5 GHz (available with N(f) connectors) |
| MN25218A | 2-port USB SmartCal Module, 1 MHz to 20 GHz (available with K(f) connectors) |
| MN25418A | 4-port USB SmartCal Module, 300 kHz to 20 GHz (available with K(f) connectors) |
| 36585K-2M | K Precision AutoCal Module, 70 kHz to 40 GHz, K(m) to K(m) |
| 36585K-2F | K Precision AutoCal Module, 70 kHz to 40 GHz, K(f) to K(f) |
| 36585K-2MF | K Precision AutoCal Module, 70 kHz to 40 GHz, K(m) to K(f) |
| 2000-1809-R | Serial to USB Adapter (required for 36585 AutoCal module if control PC does not have a serial port) |
Mechanical Calibration Kits
| Model Number | Description |
| 3650A | SMA/3.5 mm Calibration Kit, Without Sliding Loads, DC to 26.5 GHz, 50 Ω |
| 3650A-1 | SMA/3.5 mm Calibration Kit, With Sliding Loads, DC to 26.5 GHz, 50 Ω |
| 3652A | K Connector Calibration Kit, Without Sliding Loads, DC to 40 GHz, 50 Ω |
| 3653A | N Connector Calibration Kit, Without Sliding Loads, DC to 18 GHz, 50 Ω |
| OSLN50A-8 | Precision N Male Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω |
| OSLNF50A-8 | Precision N Female Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω |
| TOSLN50A-8 | Precision N Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω |
| TOSLNF50A-8 | Precision N Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω |
| OSLN50A-18 | Precision N Male Open/Short/Load Mechanical Calibration Tee, DC to 18 GHz, 50 Ω |
| OSLNF50A-18 | Precision N Female Open/Short/Load Mechanical Calibration Tee, DC to 18 GHz, 50 Ω |
| TOSLN50A-18 | Precision N Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 18 GHz, 50 Ω |
| TOSLNF50A-18 | Precision N Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 18 GHz, 50 Ω |
| TOSLK50A-20 | Precision K Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 20 GHz, 50 Ω |
| TOSLKF50A-20 | Precision K Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 20 GHz, 50 Ω |
| TOSLK50A-40 | Precision K Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 40 GHz, 50 Ω |
| TOSLKF50A-40 | Precision K Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 40 GHz, 50 Ω |
| TOSLK50A-43.5 | Precision K Male Through/Open/Short/Load Mechanical Calibration Tee with S1P data, DC to 43.5 GHz, 50 Ω |
| TOSLKF50A-43.5 | Precision K Female Through/Open/Short/Load Mechanical Calibration Tee with S1P data, DC to 43.5 GHz, 50 Ω |
Cables and Adapters
| Model Number | Description |
| 1091-26-R | SMA(m) to N(m), DC to 18 GHz, 50 Ω |
| 1091-27-R | SMA(f) to N(m), DC to 18 GHz, 50 Ω |
| 1091-80-R | SMA(m) to N(f), DC to 18 GHz, 50 Ω |
| 1091-81-R | SMA(f) to N(f), DC to 18 GHz, 50 Ω |
| 71693-R | Ruggedized adapter, K(f) to N(f), DC to 18 GHz, 50 Ω |
| 34NK50 | Precision Adapter, N(m) to K(m), DC to 18 GHz, 50 Ω |
| 34NKF50 | Precision Adapter, N(m) to K(f), DC to 18 GHz, 50 Ω |
| 34NFK50 | Precision Adapter, N(f) to K(m), DC to 18 GHz, 50 Ω |
| 34NFKF50 | Precision Adapter, N(f) to K(f), DC to 18 GHz, 50 Ω |
| K220B | Precision Adapter, K(m) to K(m), DC to 40 GHz, 50 Ω |
| K222B | Precision Adapter, K(f) to K(f), DC to 40 GHz, 50 Ω |
| K224B | Precision Adapter, K(m) to K(f), DC to 40 GHz, 50 Ω |
| 33KK50C | Calibration Grade Adapter, K(m) to K(m), DC to 43.5 GHz, 50 Ω |
| 33KKF50C | Calibration Grade Adapter, K(m) to K(f), DC to 43.5 GHz, 50 Ω |
| 33KFKF50C | Calibration Grade Adapter, K(f) to K(f), DC to 43.5 GHz, 50 Ω |
| 34VFK50A | Precision Adapter, V(f) to K(m), DC to 43.5 GHz, 50 Ω |
| 34VFKF50A | Precision Adapter, V(f) to K(f), DC to 43.5 GHz, 50 Ω |
| 34VK50A | Precision Adapter, V(m) to K(m), DC to 43.5 GHz, 50 Ω |
| 34VKF50A | Precision Adapter, V(m) to K(f), DC to 43.5 GHz, 50 Ω |
Test Port Cables, Flexible, Ruggedized, Phase Stable
| Model Number | Description |
| 15NNF50-1.0B | Test Port Cable, Flexible, Phase Stable, 1.0 m (39”), DC to 18 GHz, N(f) to N(m), 50 Ω |
| 15NNF50-1.5B | Test Port Cable, Flexible, Phase Stable, 1.5 m (59”), DC to 18 GHz, N(f) to N(m), 50 Ω |
| 15NN50-1.0B | Test Port Cable, Flexible, Phase Stable, 1.0 m (39”), DC to 18 GHz, N(m) to N(m), 50 Ω |
| 15LL50-1.0A | Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, 3.5 mm(m) to 3.5 mm(m), 50 Ω |
| 15LLF50-1.0A | Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, 3.5 mm(m) to 3.5 mm(f), 50 Ω |
| 15KK50-1.0A | Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, K(m) to K(m), 50 Ω |
| 15KKF50-1.0A | Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, K(m) to K(f), 50 Ω |
| 3671KFS50-60 | Test Port Cable, Flexible, Phase Stable, DC to 26.5 GHz, K(f) to 3.5 mm(m), 63.5 cm, 50 Ω |
| 3671KFK50-60 | Test Port Cable, Flexible, Phase Stable, DC to 40 GHz, K(f) to K(m), 63.5 cm (25 in), 50 Ω |
| 3671KFKF50-60 | Test Port Cable, Flexible, Phase Stable, DC to 40 GHz, K(f) to K(f), 63.5 cm (25 in), 50 Ω |
| 3671KFK50-100 | Test Port Cable, Flexible, Phase Stable, DC to 40 GHz, K(f) to K(m), 1 m (38 in), 50 Ω |
| 806-304-R | Flexible Phase Stable Cable, DC to 40 GHz, 36 in (91.5 cm), K(m) – K(f), 50Ω |
| 806-423-R | Flexible Phase Stable Cable, DC to 43.5 GHz, 24 in (61 cm), K(f) – K(f), 50 Ω |
| 806-424-R | Flexible Phase Stable Cable, DC to 43.5 GHz, 24 in (61 cm), K(m) – K(f), 50 Ω |
| 806-425-R | Flexible Phase Stable Cable, DC to 43.5 GHz, 1 m (39.4 in), K(f) – K(f), 50 Ω |
| 806-426-R | Flexible Phase Stable Cable, DC to 43.5 GHz, 1 m (39.4 in), K(m) – K(f), 50 Ω |
Phase-Stable 18 GHz, 40 GHz, and 43.5 GHz Semi-Rigid Cables (Armored)
| Model Number | Description |
| 3670N50-1 | Test Port Cable, Armored, Semi-rigid, 30.48 cm (1 ft), DC to 18 GHz, N(m) to N(f), 50 Ω |
| 3670N50-2 | Test Port Cable, Armored, Semi-rigid, 60.96 cm (2 ft), DC to 18 GHz, N(m) to N(f), 50 Ω |
| 3670NN50-1 | Test Port Cable, Armored, Semi-rigid, 30.48 cm (1 ft), DC to 18 GHz, N(m) to N(m), 50 Ω |
| 3670NN50-2 | Test Port Cable, Armored, Semi-rigid, 60.96 cm (2 ft), DC to 18 GHz, N(m) to N(m), 50 Ω |
| 3670K50A-1 | Test Port Cable, Armored, Semi-rigid, 30.48 cm (1 ft), DC to 43.5 GHz, K(m) to K(f), 50 Ω |
| 3670K50A-2 | Test Port Cable, Armored, Semi-rigid, 60.96 cm (2 ft), DC to 43.5 GHz, K(m) to K(f), 50 Ω |
Tools
| Model Number | Description |
| 01-200 | Calibrated Torque End Wrench, GPC-7 and Type N |
| 01-201 | Torque End Wrench, 5/16 in, 0.9 N.m (8 lbf·in) (for tightening male devices, for SMA, 3.5 mm, 2.4 mm, K, and V connectors) |
| 01-203 | Torque End Wrench, 13/16 in, 0.9 N.m (8 lbf·in) (for tightening ruggedized SMA, 2.4 mm, K and V test port connectors) |
| 01-204 | End Wrench, 5/16 in, Universal, Circular, Open-ended (for SMA, 3.5 mm, 2.4 mm, K, and V connectors) |
Anritsu has partnered with the following industry-leading companies to provide a variety of proven material measurement capabilities that are compatible with the VectorStar and ShockLine vector network analyzer families.
Material Measurements
 | Compass Technology Choose from off-the-shelf or custom-designed RF material measurement systems able to measure material properties from 100 MHz to 90 GHz. These solutions include: focused beam, resonant cavity, waveguides, spot probes, free space measurement systems, and more. Anritsu and Compass Technology Group Material Measurements Solutions Compass Technology Group VectorStar Integration [video] |
 | Keycom Technologies Select from a variety of material measurement solutions that leverage various methods including: resonator, frequency change, probe type, co-axial tube and waveguide type S-parameter, free space, capacitance, epsilometery, and more. Anritsu and Keycom Material Measurement Solution |
 | SWISSto12 Providing hardware and software technology capable of measuring: solid samples; soft sample and foam; liquid samples and powder; thin films; dielectric coatings and multilayer materials; alumina plate; and more. Anritsu and SWISSto12 Material Measurement Solution |
